Code & Name Description

401

DURA CRETE MC-5
A single component high strength, polymer modified, shrinkage controlled, free flowing micro-concrete for a mass fill in of all structural repairs, suitable for 30mm - 150mm thickness.

 

402

DURA CRETE MC-10
A single component polymer modified, shrinkage controlled, free flowing micro-concrete for a mass fill in of all structural repairs, suitable for 50mm - 200mm thickness.

 

403

DURA CRETE ST
Single component, shrinkage controlled, polymer modified structural grade cementitious repair mortar, available in grey powder, needs only addition of clan water on site. Trowelable and suitable for hand placed repair where significant load bearing is required.

 

404

DURA CRETE STF
A fiber reinforced structural grade, single component, shrinkage controlled, polymer modified cementitious repair mortar. The product is supplied as ready to use dry powder that only needs the addition of clean water on site to produce a repair mortar. Trowelable and also suitable for hand placed repairs where significant load bearing is required. DURA-CRETE STF can be applied in thicknesses between 5mm - 100mm depending on the application.

 

405

DURA STOP
Single component, fast setting water stopping mortar designed for emergency plugging and patching of concrete in wet areas within 60 seconds.

 

406MC-5

DURA CONRETE CLEANER
Is a strong acidic cleaner and degreasing solution for use on tiles, concrete and concrete products.

 

407

DURA PRIME ZR
Two component, solvent borne zinc rich epoxy primer, providing corrosion protection to steel surfaces. The product is a thick grey liquid of paint-like consistency, and is recommended for use in areas like sea side and highly humid environment.

 

408

DURA INJECT EPLV
Two-part, solvent free, low viscosity, epoxy resin for sealing cracks using the injection method. It can be applied to dry or wet surfaces to provide water resistance. It has excellent adhesion to concrete, masonry or brick.

 

409

DURA EPOXY COMPOUND
Two component Solvent free epoxy putty that is a high strength, non- shrink epoxy bedding, filling and repair mortar. The product is resistant to common chemicals. It may be applied as a basecoat and repair product for floors that will be finished with modern coatings.

 

410

DURA GUNIT FR
Is supplied as a premeasured bagged powder. The product is a blend of Portland cement, PP Fibers, Silica fume, graded fillers and chemical additives. It is a one component un-accelerated cementious silica fume based Gunite mortar that is suitable for use in hot and tropical climate conditions. It can be applied from 15 mm to 80 mm.

 

411

DURA CURE A
Is a non-hazardous, water based, low viscosity acrylic emulsion concrete curing compound that can be applied by spraying onto freshly poured concrete. Supplied as a one- part emulsion that is ready to use on site, the product forms a continuous, non-penetrating coating that dries to a clear film. This protective coating prevents rapid evaporation of water from the fresh concrete ensuring uniform hydration, increased concrete durability, and reduced shrinkage cracks on the surface. It is ideal for large areas of exposed concrete where an improved finish is necessary. A white pigmented version of the product is also available and this product dries to a white film which is designed to reduce solar temperature gain.

 

 

Website By : EasyBooks